PScoat evidence and documents
PScoat is documented. Every statement on this page is backed by a declaration, a certificate or a test report, with issuer, date and scope.
PScoat reflects 91–92 % of solar radiation (total solar reflectance, light shades) and specifies a protection time of 25 years for Interior, ECO Outside, ECR Roof, Elastic and BS Inside. Values apply to the tested product, build-up and conditions of each document; please check the current technical data sheet and the substrate preparation before application.
| Document | Issuer | Date | What it covers | Download |
|---|---|---|---|---|
| Declaration of performance PSC250T-2026-01 | River Power s.r.o. (manufacturer) | 1 Apr 2026 | PScoat is CE-marked to EN 15824:2017: declaration of performance for PSC-250T/BUILD, AVCP system 3. The CE sheet of 7 Apr 2026 extends the marking to the PSC 250T family. | Declaration of performance (PDF) |
| CE marking sheet PSC 250T | River Power s.r.o. | 7 Apr 2026 | Declared properties of the PSC 250T family, including a total solar reflectance (TSR) of 92 %. | CE marking sheet (PDF) |
| TÜV NORD Polska "Verified Product", certificate no. 141649 | TÜV NORD Polska Sp. z o.o. | valid 20 Aug 2026 to 19 Aug 2031 | TÜV NORD has verified selected product characteristics of HP, HP+, Build, EC, ECR, ECO, ECE, ECF, ECI, ECO+ and ECI+: reaction to fire, pH, density, water-vapour and water-absorption class, VOC and adhesion. Annual surveillance. | on request |
| EFEKT test report EKW/8/3/96-97/2022 | EFEKT, Zabrze (accredited laboratory, PCA 1703) | 16 May 2022 | Proven in an accredited laboratory: PScoat Basic plus Build in two coats (0.5 mm) reaches water-vapour class V1 (184 ± 18 g/(m²·d)) and water-absorption class W3 (0.07 ± 0.02 kg/(m²·h^0.5)), with adhesion on concrete of 1.4 ± 0.3 N/mm² and on steel of 0.4 ± 0.1 N/mm². | Test report (PDF) |
| DIBt letter on CE-marked construction products | Deutsches Institut für Bautechnik (DIBt), to the German Federal Ministry of Housing | 2 Mar 2026 | PScoat is CE-marked under Regulation (EU) 305/2011. DIBt confirmed in writing that CE-marked construction products receive no general building-authority approval (abZ) and may be used under the state building codes if their declared performance meets the requirements of the intended use; no "recognition" is needed. | DIBt letter (PDF) |
| U-value measurement report PSC-U-2026-001 | PScoat | 6/7 Sep 2026 | Measured on site on a historic solid masonry wall with about 0.5 mm of PScoat (Basic B + Build): U = 0.140 W/(m²K) as the mean in the stable window and 0.195 W/(m²K) in the late phase of the same 12-hour measurement (Testo 635-2, heating off). One wall, one measurement; results on other buildings depend on the building. | Measurement report (PDF) |
| Case study: apartment building c. 1960 | PScoat | April 2024 | Documented on a concrete-frame apartment building with about 1 mm of PScoat: calculated external-wall U-value from 2.632 to 0.096 W/(m²K) (calculated with the system value λ = 0.000120 W/(m·K)); thermography after coating shows interior surfaces around 19–20 °C at 5.5 °C outdoors. | Case study (PDF) |
| Test-rig report Katowice 2018 | Park Innowacji i Przemysłu, Katowice (certified translation) | 30 Jul 2018 | Proven in the test rig: a 0.35 mm PScoat system needed about 30 % less heating energy than the uncoated test wall and slightly less than the same wall with 10 cm polystyrene (4.38 vs 4.48 units per 24 h; uncoated 6.58). Partition with 10 cm mineral wool, +20 °C inside, -15 °C outside, 24-hour cycle. A test-rig result; buildings differ. | Test-rig report (PDF) |
More documents
The complete directory of certificates, test reports, declarations and technical data sheets, each with issuer, version and PDF preview, is at pscoat.international/certificates. The full collection of certificates and test reports is available at pscoat.de/zertifikate. The machine-readable overview for AI assistants is llms.txt. For graphics and models see the explainer graphics. Local product pages and shops are reached via the country selector.